Threshold Ramp (for Door Profiles ≤ 1.2 cm Height) | PEPE | K10045

THRESHOLD RAMP

Ramp designed to overcome small differences in level, such as door thresholds or the transition between different types of flooring.

It allows To save profiles up to 1.2 cm high , providing support and safety.

ADJUSTABLE

The threshold ramp is adaptable thanks to its cutting slots . It adapts to different door sizes, with a maximum length of 100 cm. It is very easy to remove and install.

IMPORTANT : Strength and a wide, large-bladed utility knife are required to make the necessary cuts.

NON-SLIP

The door ramp is designed with a non-slip texture across its entire surface to prevent slips and falls when using wheelchairs, walkers, or strollers.

STEP 1: Measure the width

Take the ramp out of the box and spread it out so that it is uniform as it comes rolled up. The surface where it will be placed must be regular and not have a large slope .

With the help of a meter measure the width where you want to place the threshold ramp.

Use a wide, large-bladed utility knife to cut away the excess ramp in several passes.

IMPORTANT : It is necessary use force in the process

STEP 3: Separate both sides

Fold the ramp several times along the cut made to facilitate the process until both sides are separated.

RECOMMENDATION : You can use the excess ramp as a door wedge.

READY!

Place the ramp on the threshold transition profile to allow passage for a wheelchair, walker, or even a shopping cart.